Chipmaster Radiant RAD-6000

Overview

The Chipmaster Radiant provides a wide area preheat solution, which gradually and uniformly maintains a temperature sufficient to stabilize the PCB prior to and during the rework operation. This constant total area heat stabilization is not possible with bottom focal preheat systems.

Rework larger PCB’s safely

A common problem in reworking larger circuit boards, typically greater than 16" x 14" (406 x 356 mm) is warp during the local heating process. This problem can also be experienced on smaller boards depending upon layer structure and connection distribution. The Chipmaster Radiant solves the warpage problem!

High mass radiant energy

The Chipmaster Radiant delivers 144 sq. inches of digitally controlled radiant energy accurate to ±2°F, once calibrated. Its cast aluminum surface may be machined for unique profiling for one or more circuit boards.

Thermal Imaging Surface

Specifications:

Chipmaster 8100-1003 110V, 60Hz CSA
Chipmaster 8100-1023 220V, 50Hz CE
Power 1200 Watts
Current 10.90 Amp @ 110V, 5.45 Amps @ 220V
Dimension 22.25" x 9.25" x 8.62" (362 x 235 x 219 mm)
Board Holder 8100-2424 24" x 24" (610 x 610 mm)
Nozzles included: (User may select alternatives)
8100-0000-44 0.80" x 0.80" (20.3 x 20.3 mm)
8100-1424 0.71" x 0.40" (18.0 x 10.2 mm)
8100-1075 1.00" x 0.75" (25.4 x 19.0 mm)
8100-1414 1.40" x 1.40" (35.6 x 35.6 mm)
8100-0000-20 0.50" x 0.50" (12.7 x 12.7 mm)
8100-0000-68 1.10" x 1.10" (28.0 x 28.0 mm)
Temperature Celsius or Fahrenheit
Air Velocity <12.7 CFM
Vacuum Internal Pump
Air Souce Internal Blower
Controller Fuzzy logic PID
Hot Plate 8100-6000 110V 60Hz CSA
Hot Plate 8100-6002 220V 50Hz CE
Controller Fuzzy Logic PID
Surface Area Cast Aluminium 12" x 12" (305 x 305 mm)

Low Temperature Operation

When equipped with the Low Temperature, High Power technology of the Chipmaster Radiant, you’ll be able to rework soft plastic components at less than 410°F, which would otherwise distort or melt down with conventional systems.

Articulating Board Holder 8100-2424

The 8100-2424 articulating Board Holder is an important dual-axis mechanism, which positions the PCB over the radiant surface for rework to the circuit board and returns the PCB to its original cool start location for preparation and cleaning.

Link to Hot Plate webpage - Click here!

RAD-6000 System includes:

8100-1003 Chipmaster with Profile Storage Controller
8100-6000 Radiant Preheater 12" x 12" (305 x 305 mm)
8100-2424 Board Holder
8100-1102 Chipmaster Riser Platform
8100-1103 Board Holder Riser Platform
8100-0598 Halogen Light 110V
8100-1097 SMD Tool Kit
8100-1649 Nozzle Kit three (3) piece