Flo-Master III SMD-5003

Overview

The third system in the Flo-Master family is the Flo-Master III. This machine is designed for the largest PCB types, which require extreme high energy bottom heat to assist in low temperature reflow.

Machine and Computer stored profiles

Flo-Master III

The Flo-Master III includes a 12” x 12” (305 x 305mm) 3600 Watt Forced Air Convection Bottom Heater providing sufficient energy for very large boards 20” x 24” (508 x 610mm)

Flo-Master II & Flo-Master III Specifications:

Flo-Master II Focal Heat Power 2400 Watts 220V 50/60 Hz 15 amps

Flo-Master II Panel Heat Power 3600 Watts 220V 50/60 Hz 20 amps

Flo-Master III Panel Heat Power 4800 Watts 220V 50/60 Hz 30 amps

Flo-Master II Panel Heat Dimension 8” x 10” (203mm x 254mm)

Flo-Master III Panel Heat Dimension 12” x 12” (305mm x 305mm)

Flo-Master II Board Holder 8100-1517, PCB size 15” x 17” (381 x 432mm)

Flo-Master III Board Holder 8100-1620, PCB size 16” x 20” (406 x 508mm)

Flo-Master II Dimension 20.5” x 22” x 29” (521 x 559 x 737mm) H x W x D

Flo-Master III Dimension 20.5” x 28.5” x 32.5” (521 x 724 x 825mm) H x W x D

Reflow Nozzles included

Preheat Nozzles included (Focal Heat only)

Multiple Ramp & Soak Segments

Temperature Celsius, Fahrenheit selectable

Reflow Air Velocity 12.7CFM

Component Vacuum Pick Up Internal Venturi Factory Air for Z axis 80 PSI

Controller reflow Sixteen (16) Profile, 16 Segment

PIDComputer Interface RS422/RS232 (Cable provided)

Controller Bottom Heat Four (4) Bottom Heat temperatures stored

Air Flow Up to 1 SCFM

Weight

Z Axis Travel 2” (50mm)

X-Y Table mounted Sleeve Bearing

New Ledge Support Board Holders for Flo-Master II & Flo-Master III

Computer Software Windows 95/98

Data Logging PDF Adobe 4.0 (not supplied)

A new range of Board Holders is available for use with the Flo-Master family. They include smooth action bearings and edge PCB support. The Model 8100-1517 15” x 17” is provided with the Flo-Master II system and the 8100-1620 16” x 17” is supplied with the Flo-Master III. Other sizes are available (see Board Holders below)

Flo-Master II Order Information:

5000-1002 Flo-Master II Focal Heat 220V 50/60Hz

5000-6002 Flo-Master II Panel Heat 220V 50/60Hz

8100-1620U PCB Holder Upgrade 16” x 20” (406 x 508mm)

Flo-Master III Order Information:

5003-6002 Flo-Master III Panel Heat 220V 50/60Hz

8100-2024U PCB Holder Upgrade 20” x 24” (508 x 610mm)

New Board Holders:

8100-0812 8”x12” (203 x 304mm)

8100-1517 15”x17” (381 x 432mm) Included Flo-Master-II

8100-1620 16”x20” (406 x 508mm) Included Flo-Master III

8100-2024 20”x24” (508 x 610mm)