| The EX 750 REPAIR
AND MANUFACTURING SYSTEM is the ideal station for
sensitive expensive electronic circuit. The EX
750 is a surface mount and conventional component
repair and rework station. Tip temperature is
electronically controlled from 450° F
to 900° F. Two programmable digital controllers
feature responsive closed loop temperature
control with LED readout set & operating
temperature and an instant-rise internal vacuum
pump. Zero voltage thyristor insures that no high
voltage spikes or magnetic fields will be present
on the soldering or desoldering tip. An
ergonomically designed handpiece for solder
reflow of PLCC surface mount devices with
temperature controlled high thermal mass heaters
target the heat to the leads without causing
damage to the adjacent component or board. New
stop clog filter remove flux fumes and other
foreign matter before contamination of the
internal pump. |
| |
|
|
| Standard System Includes: |
|
|
- EX-1700
Desolder Handpiece
- Hot Air
Jet-Reflow Tool Kit
- Sensor
Control Solder Iron
- Power supply
with digital
temperature control
- Self
contained instant
rise pump
- Dual iron
holder assembly with integral cleaning
station
- Thermal Quad
Pack Tweezer
- Quad Pack
Tweezer Holder
- Cleaning
Brushes
- Accessory
Experimental Tip Kit
- Foot Pedal
- Operation
Manual
|
Model EX-750
Specifications
|
110/120
vac. 50/60 Hz 10.2" Lx8.5" Wx4.75"
H
(25.9 cmL x 21.6 cm W x
12.0 cmH)
Weight 14.5 lbs (6.58 Kg) Part No. 0750-0002
|
220/240
vac. 50/60 Hz
10.2" Lx8.5" Wx4.75" H
(25.9 cmL x 21.6 cmW x 12.0 cmH)
Weight 14.5 lbs (6.58 Kg)Part
No. 0750-2002
|
Optional Features:
- Vacuum Pick
and Place Wand
- Spare Kit
- Standard
Track Repair Kit
- Starter
Consumable Kit
- Vacuum Pick
and Place Wand
- One Year
Consumable Kit
|
Operating
Temperature Range:
- Settable
range for Extractor
and Soldering Iron
- 450° F
(232° C) To 900° F (482° C)
- Idle
temperature stability : ±2.0F
Safety Rating - in compliance
with:
- DOD-STD-2000-A
- MIL-S-45743E
- WS-6536E
|
